XJDeveloper Screens

Help is available from each screen in XJDeveloper by pressing the F1 key.

Startup

• Start Screen - the screen shown when XJDeveloper is launched with no project open.

Navigating XJDeveloper Screens

All screens are listed on the left side of the main window. The screen buttons can be used to navigate to a screen or bring a separated screen to the front when clicked. For screens that can be separated, this can be achieved by clicking the pop-out icon on the screen button. This icon will then change so that it can be used to pop-in and navigate to that screen with one click. Any separated screens are indicated by a grey line on the left side of the relevant screen icon.

This list can be collapsed to just show the screen icons or expanded again using the arrow in the Setup header.

Setup

• Boards Screen
• Connections Screen
• Power/Ground Nets Screen
• JTAG Chain Screen
• Categorise Devices Screen
• Constant Pins Screen
• Passive Device Files Screen
• Test Device Files Screen
• Logic Files Screen
• Circuit Code Files Screen
• Variants Screen
• Test Coverage Screen

Run and Deploy

• Pin Mapping Screen
• Analyser Screen
• Debug Connection Test Screen
• XJRunner Configuration Screen
• Run Tests Screen