XJDemo v4 Example

This example is broken down into 3 sections

Hardware Configuration

In order to use the XJIO board you need to use the JTAG chain configuration jumpers to route the chain correctly through the XJIO board and UUT. You also need to make the physical connections between the XJIO board and those areas of your UUT that you want to test.

XJDeveloper Setup

In order to extend the testing of the XJDemo board you need to describe the whole circuit, including the XJIO board, using XJDeveloper.

Analogue Testing

Once you have reached a limit of digital testing on a UUT you may be able to extend testing further using the analogue capabilities of the XJIO board.